哈德沃角码

+86 13590665616
04.22 2022

In the design of the flow channel for adhesive corner code injection

Corner code gluing can be done without gluing after factory assembly, and can be adjusted and glued during installation, taking into account installation and transportation considerations; However, the injection of glue into the collision angle is caused by the deformation of the profile, and even if the glue is not injected after assembly, it cannot be disassembled, which poses hidden dangers such as inconvenient installation and transportation;

More >
03.26 2022

Accuracy of the glue corner code equipment master

Glue injection for corner codes can be divided into: corner installation glue injection and pin glue injection! The collision angle injection process further tests the master's skills and the accuracy of the equipment.

More >
03.24 2022

Test strength of adhesive corner code

By comparing the angular strength tests of ordinary group angles and injection angle code group angles, it can be concluded that under the same deformation conditions, the angular strength of the injection angle group can be increased by about 5.7 times.

More >
03.18 2022

Filling method for making adhesive corner codes

The two fixed ends of the corner code are connected into a right angle shape through a connecting plate. The two fixed ends of the right angle corner code are equipped with weight reducing holes. The outer corner of the connecting plate is equipped with a rubber outer filling groove, the inner corner of the connecting plate is equipped with a rubber inner filling groove, the upper side of the connecting plate is equipped with a rubber upper filling groove, and the lower side of the connecting plate is equipped with a rubber lower filling groove.

More >
03.16 2022

Molding collision angle of adhesive corner code

Use die cast impact angle injection corner codes. Unable to process on-site and requires precise 45 ° cutting of profiles.

More >
03.15 2022

Process assembly of adhesive corner code

The adhesive corner code compares the compressive strength of two products by placing the seamless welding corner assembly and the pin injection process corner assembly on a press machine and applying pressure. After testing, seamless welding joints will deform and crack when subjected to an external force of 682 Newtons; The window angle of the pin injection process requires a pressure of over 1749 Newtons to deform and crack!

More >
Back to top

Service Hotline

Tel.:+86 13590665616

E-mail: sunnyxiulan@gmail.com

Copyright© Foshan Xuanqing Hadewo Home Technology Co., Ltd. 　粤ICP备2021103218号　Technical support：Yunlu Technology