哈德沃角码

Glue injection for corner codes can be divided into: corner installation glue injection and pin glue injection! The collision angle injection process further tests the master's skills and the accuracy of the equipment.

Pin gluing is slightly simpler and does not require much technical expertise!

But both are based on the injection molding process, which can make the structure more sturdy and less prone to water leakage!

Many people are still not familiar with the use of dowel pins for glue injection. In fact, it is a combination of words, where dowel pins are accessories and glue injection is the process flow. The system window opening sash frame and sash are composed of four corners, and the four edges are also connected and fastened by firmware corner codes. When it comes to corner codes, it is necessary to distinguish between movable corner codes and fixed corner codes.

The overall corner code mechanism is sturdy, and the pin is inserted through automated equipment. The connection method of the overall corner code and pin does not have to worry about looseness, which increases the overall performance of the window. Simply put, the pin is actually a combination of a locator and a screw, which locates the corner code and can also be connected and fastened like a screw, with stability far exceeding that of screws and locators.

And the activity corner code is composed of two pieces, using a built-in locator with a fixed link for easy installation, which is a common process in many system window products. However, due to this convenient product, it is prone to loosening, misalignment, and a high probability of window frame gap deformation, which affects the sealing and waterproof performance of the window.

For most manufacturers, the process of injecting glue into the corner code system window pin corner code will choose the overall corner code as the connection point, which significantly improves the sound insulation, heat insulation, wind pressure resistance, stability and service life of the window. However, the movable corner code also has advantages, which can reduce costs and cater to the mid to low end market. Even if it may be a bit imperfect, it is still much better than ordinary windows. It depends on personal requirements. When choosing system doors and windows, compare them more and you will always find a suitable product.